What is the installation method of Mounted Bearing?

There is a gap between the inner hole of Mounted Bearing and the shaft, and the inner ring of the bearing is fixed on the shaft with a top wire, an eccentric sleeve or an adapter sleeve, and rotates with the shaft.

• What is the meaning of Mounted Bearing？

• What is the installation method of Mounted Bearing?

• What are the applications of Mounted Bearing?

What is the meaning of Mounted Bearing？

In the general industrial field, Mounted Bearing is easy to install because it has its own bearing seat, and the bearing seat has already sealed the bearing, so it is easy to install. Even people who don't know much about bearings can install Mounted Bearing on the shaft. superior.

What is the installation method of Mounted Bearing?

1. Before installation, be sure to unplug the fixing pin of the Mounted Bearing jacket, and at the same time polish the surface of the journal to be smooth and clean, free of dust, etc., and apply oil to the journal to prevent rust and lubricate (allow the bearing to rotate slightly on the shaft) .

   
   

2. Apply lubricating oil on the bearing seat and the bearing mating surface, then install the Mounted Bearing into the bearing seat, and then put the assembled bearing and bearing seat on the shaft. and push it to the location to be installed.

   
   

3. Do not tighten the bolts that fix the bearing housing, so that the Mounted Bearing jacket can rotate in the bearing housing. Also install the bearing and seat on the other end of the same shaft, turn the shaft a few times, let the bearing itself find the correct position automatically, and then fasten the bearing seat bolts.

   
   

4. Install eccentric sleeves. First put the eccentric sleeve on the eccentric step of the Mounted Bearing inner sleeve, and tighten it in the direction of rotation of the shaft by hand. Then insert the small iron rod into or against the countersunk hole on the eccentric sleeve. Hit the small iron rod with a hammer in the direction of rotation of the shaft. Install the eccentric sleeve firmly, and finally tighten the hexagon socket head cap screw on the eccentric sleeve.

What are the applications of Mounted Bearing?

Mounted Bearing usually has bolts, which are convenient to fix where it should be fixed. There are also slider type and frame type, which are fixed by clamping, and cantilever type and hanging type, usually with threads, which are convenient to be fixed on the rod end. or hang in the air.

Because the design of different machines is very different, Mounted Bearing has a wide range of applications, so there are quite a variety of types of spherical ball bearings with seats. There are five or six kinds of sealing methods, and more than a thousand types are arranged and combined, and each type has many bearing models. Therefore, the models of spherical ball bearings with seats can be said to be infinite.

Would you like to order a Mounted Bearing against this background? If necessary, you can contact Shandong Xuanye Precision Machinery Co., Ltd. You will supply the Mounted Bearing of best quality.