What are the advantages of Mounted Bearing over other similar products?

The Mounted Bearing can perform simple and effective automatic self-alignment in case of installation errors and can be easily installed on various industrial shafts, especially on gear carriers. The product range of bearing seats is very wide. There are vertical seats, various flange seats, wedge slots, round seats,in execution and plastic seats and so on.

• What are the characteristics of the Mounted Bearings?

• What are the advantages of the Mounted Bearing over other similar products?

• What are the classifications of the Mounted Bearings?

What are the characteristics of the Mounted Bearings?

1. Safe positioning: The positioning of the mounting bearing inner ring is done via the threaded pin. This positioning method ensures that loosening of the screw can be prevented well even in the event of vibration and shock.

   
   

2. Alignment: The outer diameter of the outer ring of the Mounted Bearing and the inner diameter of the outer housing are spherical, so that the bearing is self-aligning. The deflection and inclination of the shaft caused by poor installation, etc. can be compensated by the self-alignment of the bearing itself.

What are the advantages of the Mounted Bearing over other similar products?

1. Auxiliary accessories

   The inner diameter of the Mounted Bearing adopts a "+" tolerance to form a play fit with the shaft.The bearing is attached to the shaft by some lifting wires, eccentric sleeves or clamping sleeves to the inner ring, which reduces the accuracy requirements of the shaft.Installation or replacement of Mounted Bearings is extremely easy.

   
   

2. Low demands on the working environment

   The Mounted Bearing is generally prefilled with grease, with double layer or triple lip seal, suitable for use in situations with a lot of dust, mud and corrosive media, and is conducive to the operation of the main motor.

   
   

3. Accuracy advantages

   The Mounted Bearing has good rotational accuracy.

What are the classifications of the Mounted Bearings?

1. Outer dome bearing with seat, also called bearing unit. If there is no bearing, this is called an outer spherical bearing seat. 1.1.1.1 The outer spherical bearing seat is divided into 200 rows according to the bearing row. 500s series. 300s series. 600s series. XOO series.

   
   

2. The outer spherical bearing seat is divided into vertical seat (P seat), square seat (F seat), diamond seat (FL seat), circular seat (C seat), boss round seat (FC seat), boss square seat (FSseat), dark hole seat (PA seat), hanging seat (FA seat).

   
   

3. Integrated (ie non-separable) vertical bearing housing with screwed bearing housing cover. These pedestal housings were originally developed as wheelset bearings for light railways, but can also be used with conventional pedestal bearings. Non-separable pedestal housings are stiffer than separate housings and some can accommodate heavier loads. The integral seat also includes the outer spherical bearing seat.

have an experienced technical team, scientific production management system and efficient logistics system so you can rest assured! If you want to know more about our products, please contact Shandong Xuanye Precision Machinery Co., Ltd.