How can we use the Mounted Bearing?

Mounted Bearing is a bearing unit that combines a rolling bearing with a bearing housing. Most of the outer spherical bearings are made of spherical outer diameter, which are installed together with imported bearing seats with spherical inner holes, and have various structural forms.

What materials are Mounted Bearing made of?

• How is Mounted Bearing assembled?

• What should pay attention to the Mounted Bearing installation?

What materials are Mounted Bearing made of?

Mounted Bearing has cast iron, cast steel, stainless steel and so on.

1. Mounted Bearing of cast iron is economical and cheap, but not durable.

   
   

2. Mounted Bearing of cast steel is durable and expensive. Where the cast steel bearing seat should not be used, use the cast steel bearing seat. When there is a problem, there may be other parts.

   
   

3. Mounted Bearing of stainless steel is used in places with corrosion.

It cannot be said what material is the best choice for the bearing seat, and the specific situation is analyzed in detail.

How is Mounted Bearing assembled?

There is a rectangular port on Mounted Bearing. Pick up the outer spherical bearing with the side facing this port. At this time, you can see the side of the bearing. The side of the bearing is cross-shaped. Put the outer spherical part into the rectangular port, and then Rotary bearing, (in the direction of the cross, not in the direction of the circumference) At this time, the bearing is embedded into the bearing seat. If it is very tight, you can apply some lubricating oil, or even heat the bearing seat to expand the inner diameter of the bearing seat, and the assembly is easy.

What should pay attention to the Mounted Bearing installation?

1. When installing the Mounted Bearing, the force should be uniform, and it should not be directly hammered. If the interference is large, the bearing should be heated in an air heating furnace or oil furnace with automatic temperature control, and the heating temperature should be strictly controlled below 120 °C.

   
   

2. Mounted Bearing equipped with nylon cage can work continuously and stably for a long time at -40 °C~120 °C. It should not work for more than 4 hours at 150 °C, and the short-term temperature peak can reach 180 °C.

   
   

3. The warehouse where Mounted Bearing is stored should be clean, dry and not allowed to be stored in the same warehouse with chemical products, the relative humidity should not exceed 65%, and the bearings are not allowed to be stored on the ground.

   
   

4. With the right installation tools

   
   

5. Mounted Bearing cleaning, most bearings need bearing cleaning before installation, impurities in the inner ring of the bearing will seriously affect the matching accuracy of the bearing and the shaft.

The above are the main precautions for rolling bearings. Please refer to the installation instructions for spherical plain bearings for the installation of sliding bearings.

Our company has a skilled team that can customize exclusive products for you according to the different needs of customers. If you are interested in this product and want to know more about it, please contact Shandong Xuanye Precision Machinery Co., Ltd.