How can we install the Mounted Bearing?

Mounted Bearing is a high-precision component product composed of grease-sealed deep groove ball bearings and various shapes of housings. The bearing assembly can be directly installed on the main body of the mechanical device with several bolts, has the self-aligning function, and can be supplemented with grease, etc. It is a product that is very easy to install and use.

• What are the requirements for the installation environment of Mounted Bearing?

• What should be paid attention to in the lubrication of Mounted Bearing after installation?

• What is the standard for judging abnormal temperature rise in Mounted Bearing?

What are the requirements for the installation environment of Mounted Bearing?

1. Mounted Bearing should be installed in a dry and clean environment.

   
   

2. Preparations before Mounted Bearing installation:

   Mounted Bearing should be installed in a dry, clean environment.
   

   
   

3. All necessary parts, tools and equipment should be prepared;

   
   

4. The machining quality of the mating surfaces of Mounted Bearing and the housing should be carefully checked;

   
   

5. The burrs of Mounted Bearing should be removed to keep the installation surface clean;

Note: Do not unpack the bearing until the Mounted Bearing installation preparations are completed to avoid contamination of the bearing.

What should be paid attention to in the lubrication of Mounted Bearing after installation?

In order to make the Mounted Bearing operate normally, avoid the direct contact between the raceway and the surface of the rolling elements, reduce the friction and wear inside the Mounted Bearing, improve the bearing performance, and prolong the service life of the bearing, the bearing must be lubricated.

The lubrication of bearings is divided into three types: grease lubrication, oil lubrication and solid lubrication.

Grease lubrication——The bearing seat, sealing structure and lubrication facilities are simple, easy to maintain and have a certain ability to prevent water, gas, dust and other harmful impurities from entering the bearing. In general, grease lubrication is widely used.

Oil Lubrication——used for heavy load, high speed, high temperature and other occasions. The lubricating oil has good fluidity, and it is better if it is lubricated with circulating oil.

Solid lubrication——for heavy loads, high speeds, high temperatures, etc. The lubricating oil has good fluidity, and it is better if it is lubricated with circulating oil.

What is the standard for judging abnormal temperature rise in Mounted Bearing?

The temperature of Mounted Bearing can generally be inferred from the outdoor temperature of the bearing. If the oil hole is used, the temperature of the outer ring of the bearing can be directly measured. The temperature of the bearing starts to rise slowly with the operation of the bearing, and reaches a stable state after 1 to 2 hours. The normal temperature of Mounted Bearing varies depending on the heat capacity, heat dissipation, rotational speed and load of the machine. If the lubricating installation is not suitable, the bearing temperature will rise sharply, resulting in abnormally high temperature. At this time, it is necessary to stop and take necessary preventive measures.

After reading the above information, are you interested in Mounted Bearing? If you also want to order a fully Mounted Bearing, please contact Shandong Xuanye Precision Machinery Co., Ltd.